The complex of the equipment for repair of pipelines (KORT-1.000) is intended for cutting out and replacement of defective sections, cutting- in and out of various processing equipments on active pipelines, including oilfield, main and oil- products pipelines. It is […]
Set of assembly parts depending on a standard size of the installation for shutdown of pipelines Designation Name KORT-1.273 Ø 273 mm KORT-1.325 Ø 325 mm KORT-1.377 Ø 377 mm KORT-1.426 Ø 426 mm KORT-1.530 Ø 530 mm 30с, DN150 PN 6,3 […]
The Installation is intended for temporary tight shutdown of the repaired section of the pipeline on one or both sides from a product being under pressure (no more than 1.6 MPa) of a product (water, gas, oil). The shutdown installation […]
It is applied for sealing of welded side pipe nipples of DN= 150 mm for the use of ensuring disassembly of a gate valve. The device is fastened with the flange on the gate valve of the disassembled side pipe […]
The unit is intended for mechanical cutting of pipes with simultaneous preparation of edges of the pipe for welding, including cutting on isolation. It is equipped with two tension chain and is stable in the direction of the movement (feed) […]
Units for cold cutting out are intended for mechanical cutting out openings in pipelines of DN=150…1200 mm being under pressure of operating medium of up to 6,3 MPa (oil, water,etc.) through shutoff valves established on the side pipe nipple of […]